ECONEXT® wall terminal 2.0 for condensing boilers
The new developed modular ECONEXT® wall terminal 2.0 focuses on optimised efficiency for boiler operation and installation time. It is now even easier to redirect ‘problem’ plume and to comply with possible regulation and legislation.
We have managed to improve our well ingenious ECONEXT® wall terminal, of which millions have been installed, with features included in the ECONEXT® 2.0. Here, the standard straight outlet can be exchanged with a simple rotary lock for a plume deflector or for a Plume Management Kit, quick easy and safe.
Especially designed for condensing heating appliances with a maximum flue gas temperature of 120°C (T120)
Interchangeable nozzle
The most efficient way between 2 points is a straight line
That is why in many cases a wall terminal with a straight nozzle is the best solution. All the knowledge and experience from the existing model has been incorporated into this new wall terminal to optimize resistance, pressure loss and recirculation.
It is possible that a straight exhaust causes nuisance
There is now the option of exchanging the straight nozzle for a deflector in order to divert the flue gases in the desired direction, easily and safely.
The design has focused on preventing rain or condensation from entering through the air inlet pipe,
regardless of which nozzle is used. The captured water is being drained off the wall in a controlled manner.
If this does not give the desired result, the nozzle can be replaced by a bend for connecting a Plume Management Kit with which the outlet of flue gases can be guided to a higher level.
Read more about the Plume Management kit
This modular wall terminal 2.0 offers you a 3-in-1 solution, a fast solution for every situation.
Specifications:
- Concentric Ø 60/100 mm.
- Flue gas pipe Ø 60 of UV resistant plastic.
- Air inlet pipe Ø 100 of galvanised steel or plastic.
- Aerodynamic nozzle with excellent water trap and outlet.
- Nozzle, deflector and Plume Management Kit made of UV resistant plastic.
- Outside wall plate in the same colour as the nozzle and made of sustainable EPDM.
- Inside wall plate in the colour white, same as the outer pipe (RAL 9016) and made of sustainable EPDM.
